|
|
|
|
The IOLAN SDS L Serial Device Server provides High-Speed serial data transmission over 4G LTE cellular networks. The IoT and M2M drives the desire to connect serial base ( RS232, RS422 and RS485 ) devices like PLC’s, meters, sensors, modems, POS, printers and industrial equipment to remote serial based COM port, UDP or TCP socket based applications. However, these devices are often located where hardwired Ethernet connections are not available. With the proliferation of cellular networks, and affordable data packages around the world, the means to transmit that data just got easier.
Delivering high performance in a compact size, the IOLAN SDS L offers support for a broad range of 4G LTE cellular data networks, extensive security, flexibility and IPv6 technology making it ideal for applications that require remote serial console management, data capture or monitoring.
Why IOLAN SDS L Device Servers are the preferred choice:
- High performance 4G LTE with fallback networks - HSPA+, UMTS, EDGE and GPRS
- Cellular data speeds up to 100Mbps
- High-Speed Gigabit Ethernet 1000base-T interface including support for 100base-TX and 10base-T
- Direct serial to serial peer connection over cellular data networks
- Remote equipment console management over cellular data networks.
- Redundant dual power inputs ( barrel and terminal block )
- TrueSerial® packet technology delivers authentic serial connections for protocol integrity
- Indicators for network and serial interfaces for easy troubleshooting
- Plug & Play installation utility eliminates configuration hassles for all IOLAN's on your IP network
- TruePort – Perle’s com/tty redirector for serial based applications operates on Windows, Vista, Linux, Solaris, SCO and Unix
- IPv6 support for investment protection and network compatibility
- Compact and protective solid steel enclosure for tabletop, wall mount or DIN rail mounting
- Java-free browser access to remote serial console ports via Telnet and SSH
- Ping watchdog probes enable customers to power cycle equipment with attached Perle RPS power switches in the event of unresponsive networking gear
Secure Serial over Cellular Connectivity
The IOLAN SDS L Device Server enables administrators to securely access remote serial console ports on equipment such as PBX, servers, routers, network storage equipment and security appliances via a cellular data network. Sensitive data such as credit card holder information is protected through standard encryption tools such as Secure Shell (SSH) and Secure Sockets Layer (SSL). Access by authorized users is assured via authentication schemes such as RADIUS, TACACS+, LDAP, Kerberos, NIS and RSA Security's SecurID tokens.
By using encryption technologies, the IOLAN SDS L can protect sensitive and confidential data from a serial device such as a credit card reader before being sent across a corporate Intranet or public Internet. For compatibility with peer encryption devices, all of the major encryption ciphers such as AES, 3DES, RC4, RC2 and CAST128 are fully supported.
Recognized as the most secure method for communicating to remote private networks over the Internet, the IPSec standard provides robust authentication and encryption of IP packets at the network layer of the OSI model. As a standard it is ideal for multi-vendor interoperation within a network providing flexibility and the ability to match the right solution for a particular application.
IOLAN Plug-ins
By choosing a Perle IOLAN Device Server you can rest assured that virtually any device with a serial COM port will operate in conjunction with your desired application exactly as it did when you had it directly connected. In the unlikely event that the Perle IOLAN Device Server does not enable this out of the box, Perle will make it work.
Perle IOLAN Device Servers utilize customer installable "Device Plug-ins" to successfully network devices where other solutions have failed. Request a free engineering consultation now.
Advanced IP Technology
With support for IPv6 the IOLAN Serial Device Server range provides organizations with investment protection to meet this rapidly growing standard.
Demand for IPv6, which is compatible with IPv4 addressing schemes, is driven by the need for more IP address. With the implementation and rollout of advanced cellular networks, a robust method is needed to handle the huge influx of new IP addressable devices on the Internet. In fact, the US Department of Defense has mandated that all equipment purchased be IPv6 compatible. In addition, all major Operating Systems such as Windows, Linux, Unix and Solaris, as well as routers, have built-in support for IPv6.
It is therefore important for end users and integrators to select networking equipment that incorporates the IPv6 standard. The IOLAN line with support for IPv6 already built in, is the best choice in serial to LTE and cellular technology.
Flexible and Reliable Serial Connections
An IOLAN SDS L Device Server is ideal for wirelessly connecting serial based COM port, UDP or TCP socket based applications to remote devices. Perle’s TruePort re-director provides fixed TTY or COM ports to serial based applications enabling communication with remote devices connected to Perle IOLAN's either in encrypted or clear text modes. You can also tunnel serial data between devices across a cellular network.
Perle's Device Management software provides better centralized control of multiple units resulting in maximum uptime for your remote equipment.
All IOLAN SDS L models have added protection against electrostatic discharges and power surges with robust 15Kv ESD protection circuitry enabling organizations to utilize this solution in the field with confidence.
Lifetime Warranty
All Perle IOLAN Serial Device Servers are backed by the best service and support in the industry including Perle's unique lifetime warranty. Since 1976 Perle has been providing its customers with networking products that have the highest levels of performance, flexibility and quality.
Hardware Specifications - IOLAN SDS L 1, 2 and 4 port Serial Device Servers
|
IOLAN SDS LA
|
IOLAN SDS LE
|
Processor
|
600Mhz ARM Processor
|
Memory
|
RAM MB
|
512M
|
512M
|
Flash MB
|
4G
|
4G
|
Interface Ports
|
Number of Serial Ports
|
1, 2 and 4 ( RJ45 )
|
1,2 and 4 ( RJ45 )
|
Serial Port Interface(s)
|
Software selectable EIA-232/422/485
|
Sun / Solaris
|
Sun / Oracle ‘Solaris' Safe - no "break signal" sent during
power cycle causing costly server re-boots or downtime
|
Serial Port Speeds
|
300bps to 230Kbps with customizable baud rate support
|
Data Bits
|
5,6,7,8, 9-bit protocol support
|
Parity
|
Odd, Even, Mark, Space, None
|
Flow Control
|
Hardware, Software, Both, None
|
Serial Port Protection
|
15Kv Electrostatic Discharge Protection ( ESD )
|
Local Console Port
|
RS232 on Serial Port ( RJ45 )
|
Ethernet Network
|
Autosensing 1000-base-T / 100-base TX / 10-base T
Auto-MDIX
|
Software selectable Ethernet speed 10/100/1000
|
Software selectable Half/Full/Auto duplex
|
Ethernet Isolation
|
1.5Kv Magnetic Isolation
|
Antennae ( Included )
|
Two multiband swivel-mount dipole antennae
|
Cellular Data Rates
|
4G LTE ( Cat. 3 )
DL: max. 100 Mbps, UL: max. 50 Mbps HSPA+ DL Cat.24
DL: max. 42 Mbps, UL: max. 5.76 Mbps EDGE Class 12 data rates
DL: max. 237 kbps, UL: max. 237 kbps GPRS Class 12 data rates
DL: max. 85.6 kbps, UL: max. 85.6 kbps
|
SIM Card slot ( empty )
|
Accepts Micro SIM ( 3FF ) as per reference standards:
ETSI TS 102 221 V9.0.0, Mini-UICC
The SIM card must be obtained by the user from their carrier of choice
|
Power
|
Back of product
|
|
Power Supply Provided
|
120 V / 230V AC to 12vDC Wall Power Adaptor included. ( Barrel connector, commercial-grade temperature – 0 to 60C )
|
2x Power Supply Selection
|
Use external power 9-30v DC on standard 5.5mm x 9.5mm x 2.1mm barrel socket or 2-pin terminal block
|
Nominal Input Voltage
|
12/24v DC
|
Input Voltage Range
|
9-30v DC
|
Typical Power Consumption
@ 24v DC ( Watts )
|
|
|
Indicators
|
LEDs
|
Power/Ready
|
Network Link
|
Network Link activity
|
Serial: Transmit and Receive data per port
|
Wireless Link
|
Wireless Strength
|
Environmental Specifications
|
Heat Output
( BTU/HR )
|
1 port:
2 port:
4 port:
|
MTBF ( Hours )*
|
|
|
Operating Temperature
|
-40° C to 75° C ( -40 F to 167° F )
|
Storage Temperature
|
-40 C to 85 C (-40 F to 185 F)
|
Humidity
|
5 to 95% (non-condensing) for both storage and operation.
|
Case
|
SECC Zinc plated sheet metal (1 mm)
|
Ingress Protection Rating
|
IP40
|
Mounting
|
Wall or Panel mounting, DIN Rail mounting kit optional
|
Product Weight and Dimensions
|
Weight
|
|
|
Dimensions
|
|
|
Packaging
|
Shipping Dimensions
|
|
|
Shipping weight
|
|
|
Regulatory Approvals
|
Emissions
|
FCC Part 15, Subpart B, Class B
|
CFR47:2003, Chapter 1, Part 15 Subpart B,(USA) Class B
|
ICES-003, Issue 4, February 2004 (Canada)
|
EN55022:1998 + A1:2000 + A2:2003 Class B
|
EN61000-3-2 : 1995, Limits for Harmonic Current Emissions
|
EN61000-3-3 : 1995, Limits of Voltage Fluctuations and Flicker
|
Immunity
|
EN55024:1998 + A1:2001 + A2:2003
|
EN61000-4-2: Electrostatic Discharge
|
EN61000-4-3: RF Electromagnetic Field Modulated
|
EN61000-4-4: Fast Transients
|
EN61000-4-5: Surge
|
EN61000-4-6: RF Continuous Conducted
|
EN61000-4-8: Power-Frequency Magnetic Field
|
EN61000-4-11: Voltage Dips and Voltage Interruptions
|
Safety
|
IEC 60950-1 : 2005 (2nd Edition) + A1 : 2009 and
EN 60950-1 : 2006 + A11 : 2009
|
CAN/CSA-C22.2 No. 60950-1-03 and ANSI/UL 60950-1,
First Edition April 1st 2003 (Recognized Component)
|
Wireless Regulatory Domain
|
Users are responsible for verifying
approval for use in their individual countries.
|
Users are responsible for verifying
approval for use in their individual countries.
|
Carrier Specific Approval
|
Auto-detecting;
|
Not required
|
Cellular Radio
|
EN 301 908-1
EN 301 908-2
EN 301 511
47 CFR Part 22
47 CFR Part 24
EN 301 908-13
|
Radio Immunity
|
EN301 489-1
EN 301 489-7
EN301 489-24
|
Cellular Data Technologies Supported
|
Penta Band LTE: 700/700/850/AWS (1700/2100)/1900 MHz; FDD-Band (13,17,5,4,2) Tri Band UMTS (WCDMA): 850/AWS (1700/2100)/1900 MHz; FDD-Band (5,4,2) Quad Band GSM/GPRS/EDGE: 850/900/1800/1900 MHz
|
Tri Band LTE: 700/AWS (1700/2100)/1900 MHz; FDD-Band (13,4,2); LTE only LTE (FDD 3GPP Release 9 UMTS/HSPA (FDD) 3GPP Release 8; Rx diversity GSM/GPRS/EDGE 3GPP Release 6; DARP/SAIC
|
Other
|
Reach, RoHS and WEEE Compliant
|
CCATS - G052929
|
ECCN - 5A992A
|
HTSUS Number: 8471.80.1000
|
Perle Limited Lifetime Warranty
|
Serial Connector Pinout
|
IOLAN RJ45 Socket
|
Direction
|
RS232
|
RS485 Full Duplex
|
RS485 Half Duplex
|
RS422
|
1
|
|
DCD
|
-
|
-
|
-
|
2
|
|
RTS
|
TxD+
|
DATA+
|
TxD+
|
3
|
|
DSR
|
-
|
-
|
-
|
4
|
|
TxD
|
TxD-
|
DATA-
|
TxD-
|
5
|
|
RxD
|
RxD+
|
-
|
RxD+
|
6
|
|
GND
|
GND
|
GND
|
GND
|
7
|
|
CTS
|
RxD-
|
-
|
RxD-
|
8
|
|
DTR
|
-
|
-
|
-
|
|
Optional Perle adapters for use with straight thru CAT5 cabling
*Calculation model based on MIL-HDBK-217-FN2 @ 30 °C
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- High-Speed 4G LTE with fallback networks - HSPA+, UMTS, EDGE and GPRS/GSM
- 1, 2 or 4 software selectable RS232/422/485 serial port interfaces
- Gigabit Ethernet ( 10/100/1000 Base-T )
- Advanced security features for data encryption, user authentication and event management
|
|
|
|
|
|
|