![](/v/vspfiles/templates/269/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
Perle IRG5500 LTE Routers and Gateways have the most comprehensive set of features, functionality, and performance to provide primary or failover back-up connectivity to remote infrastructure and assets. These ultra-low-power, rugged, high-performance Cellular Routers, with dual-SIM slots, also have models with WLAN capabilities making them a single network point of contact for fast deployments. And, there is no need for training because an IRG5500 Router comes with an intuitive web GUI. For advanced admin scrips, CLI commands are also available.
Perle IRG5500 Routers provide
fast, secure, and reliable managed LTE network connectivity where wired options are impossible to deploy or require a backup. This is crucial for enabling a wide range of applications while ensuring the highest degree of security to protect the integrity of critical services. Reduce the cost of downtime and service calls, and bringing distributed sites online faster. With support for Data, SMS, Voice, and Video, an IRG5500 and can be integrated into any enterprise cloud, building, industrial, or mobile location network infrastructure.
- Building and process automation controllers, Internet of Things (IoT)
- Smart grid assets (meters, switches, controllers), Telco infrastructure controllers
- SCADA, Distribution management systems, Remote data loggers, flow meters, sensing equipment
- Digital signage, ATMs, POS, Kiosks, Temporary "pop-up” stores
- Video surveillance controllers, IP cameras, Mobile hotspots
- Fleet management, GPS/GNSS Location tracking, Taxis, Public Service Vehicles, vehicle area networking (VAN)
- Public Service Vehicles, First responders, Command Centers
- Transit systems, Buses, Metro Subways, Railways
Cellular Band Operation Certified Worldwide over 4G LTE, DC-HSPA+, HSPA+, HSPA, and UMTS (WCDMA)
Perle IRG5500 Routers and Gateways have three cellular options to ensure
support for your carrier's primary bands in deployment areas:
- IRG5500+: LTE-A PRO CAT12. 600Mbps downlink and 150Mbps uplink speeds. Support for 24x LTE Bands and 9x UMTS/WCDMA Bands
- IRG5500: LTE-A CAT6. 300Mbps downlink and 50Mbps uplink speeds. Support for 15x LTE Bands and 6x UMTS/WCDMA Bands
- IRG5500+ FN: FirstNet Ready™ support for Band 14 (B14). LTE-A PRO CAT12. 600Mbps downlink and 150Mbps uplink speeds. Support for 24x LTE Bands and 8x UMTS/WCDMA Bands
Edge Routers with Enterprise-Grade Routing Capabilities
IRG5500 routers have all the of the advance routing functionality found in the most advanced enterprise routers.
Extensive protocol routing support means they can be easily deployed in hierarchical or large mesh network structures. A fast CPU and lots of memory ensure the router can handle a consistent and heavy workload all day long.
- RIP, RIPv2, RIPng, OSPFv1/2/3, BGP-4
- When BGP peering with multiple ISPs, the IRG5500 delivers carrier-grade routing performance capable of handling the full Internet routing table
- IPv4 & IPv6
- OpenVPN & IPSec VPN
- DHCP & DHCPv6
- IP Passthrough for deployments requiring the router to operate in Gateway or Bridge mode
- Route between any interface (LTE, WLAN, Ethernet, USB, or serial RS232)
- Reduce unwanted network traffic by creating collision and/or broadcast domains
Integrated Zone-Based Policy Firewall
The IRG5500 built-in firewall offers intuitive policies for multiple-interface routers to
protect inside networks from unauthorized access by users on an outside network. The firewall also protects inside networks from each other, for example, by keeping a human resources network separate from a user network. If there are network resources that need to be available to an outside user, such as a web or FTP server, these resources can be placed on a separate network behind the firewall, in a demilitarized zone (DMZ). The firewall will allow limited access to the DMZ, but because the DMZ only includes the public servers, any attacks there will not affect the inside network. The firewall controls when inside users access outside networks (for example, access to the Internet), by allowing only certain addresses out, by requiring authentication or authorization, or by coordinating with an external URL filtering server. A deny-all (blacklist) policy can be used to prohibit traffic between firewall security zones until an explicit policy is applied to allow desirable traffic. Router ports are assigned to zones and firewall inspection policies are applied to traffic moving between the zones. Firewall inter-zone policies come with considerable flexibility and granularity so that different firewall inspection policies can be applied to the same router port.
Enhanced Security with 2 Factor Authentication
With multiple concurrent VPN sessions and 2 Factor Authentication, Perle IRG5500 Routers enable secure communications to multiple back-end systems.
- Remote authentication (RADIUS, TACACS+) management, integrates with enterprise-grade systems to control access to devices in the field.
- Software image CRC control protects the software upgrade process against unwanted software corruption and malware
- High-speed OpenVPN, IP Security (IPsec), Triple Data Encryption Standard (3DES), and Advanced Encryption Standard (AES) encryption for data privacy over the Internet.
- Intrusion prevention enforces security policies in a large enterprise or service provider networks.
GPS / Global Navigation Satellite System (GNSS) Included
GPS and GNSS (Galileo, Glonass, and Beidou) are included by default in all IRG5500 Routers and Gateways. This enables
real-time location tracking of remote assets. Also, you can get real-time network clock updates in the router, or any attached equipment, for accurate time-stamp usage in time-sensitive applications.
Cutting-edge design certified for a wide range of deployment scenarios
High-performance components and features enable customers to take advantage of broadband network speeds while running
secure concurrent data, voice, and video services. All IRG5500 routers have high MTBF rates because they are developed with certified high-end components to provide superior reliability and uninterrupted operation.
Products can be purchased with or without antennas and with or without power cords. All functionality is included in the base price of the product. Additional accessories are sold separately.
Cellular
|
IRG5500
|
IRG5500+
|
IRG5500+ FN (Coming Soon)
|
LTE
|
LTE-A CAT6. 300Mbps downlink and 50Mbps uplink speeds
|
LTE-A PRO CAT12. 600Mbps
downlink and 150Mbps uplink speeds
|
FirstNet Ready™ certified for Band 14 (B14). LTE-A PRO CAT12. 600Mbps downlink and 150Mbps uplink speeds
|
Frequency Bandsi
Data & SMS Operation over 4G LTE with fallback networks DC-HSPA+ / HSPA+ / HSPA / UMTS (WCDMA)
|
4G/LTE Bands (15)
2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 2600(B7), 900(B8), 700(B12), 700(B13), 800(B20), 1900(B25), 850(B26), 700(B29), 2300(B30), TDD B41
3G HSPA/HSPA+ Bands (6)
2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 900(B8)
Public Safety Band
Band 26
|
4G/LTE Bands (24)
2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 2600(B7), 900(B8), 1800(B9), 700(B12), 700(B13), 850(B18), 850(B19), 800(B20), 850(B26), 700(B28), 700(B29), 2300(B30), 1500(B32), TDD B41, TDD B42, TDD B43, TDD B46, CBRS B48, 1700(B66)
3G HSPA/HSPA+ Bands (9)
2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 800(B6), 900(B8), 1700(B9), 850(B19)
Public Safety Bands
Band 26, 28
|
4G/LTE Bands (24)
2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 2600(B7), 900(B8), 1800(B9), 700(B12), 700(B13), 700(B14), 850(B18), 850(B19), 800(B20), 850(B26), 700(B29), 2300(B30), 1500(B32), TDD B41, TDD B42, TDD B43, TDD B46, CBRS B48, 1700(B66)
3G HSPA/HSPA+ Bands (8)
2100(B1), 1900(B2), AWS(B4), 850(B5), 800(B6), 900(B8), 1700(B9), 850(B19)
Public Safety Bands
Band 14, 26
|
Cellular Antenna
|
Frequency Range: 704-902-928-960/1427.9-1575.42/1710-2170/2400-2480-2690MHz
Gain: 3 dBi
Impedance: 50 ohm
Voltage Standing Wave Ratio: <3.0 (typical)
Radiation: Omni-Directional
Connector: SMA Male (Swivel)
Dimensions: 135.6 x 20.1 mm / 5.34 x 0.8 in
|
SIM
|
Dual Mini-SIM 15 x 25mm (or 2FF )
|
GPS / GNSS
|
GPS / GNSS
|
Wide-band GNSS: 1559-1606 MHz
GPS: 1575.42 MHz / GLONASS: 1602 MHz / BeiDou: 1561.098 MHz / Galileo: 1575.42 MHz / QZSS: 1575.42 MHz
Simultaneous tracking: Up to 30 channels
Active GNSS antenna support
Reports: NMEA 0183 V3.0, TAIP
|
GPS / GNSS Passive Antenna
|
GNSS Applications: GPS, Glonass, Galileo, Beidou
Frequency Range: 1561MHz~1606 MHz
Gain: 4 dBi (typical)
Impedance: 50 Ohm
Voltage Standing Wave Ratio: 2.0 (typical)
Polarization: RHCP
SMA (M) straight
Dimensions: 41.9 x 47.3 x 16.3 mm / 1.65 x 1.86 x 0.64 in
RG-174 Cable Lenght: 5 m / 16.4 ft
|
Wi-Fi
|
IRG5500
|
IRG5500+
|
IRG5500+ FN
|
Models with Integrated Wi-Fi
|
IRG5521
IRG5541
|
IRG5521+
IRG5541+
|
IRG5521+ FN
IRG5541+ FN
|
LAN Standards
|
IEEE 802.11ac complaint & backward compatible with 802.11a/b/g/n
|
Topology
|
Infrastructure ( AP ) and up to 128 Client modes
|
Radio
|
Dual-Band Radio ; 2.4GHz and 5GHz 20, 40Mhz SISO 2.4-GHz
|
Data Rate
|
up to 867Mbps
|
Security
|
WEP, WPA-PSK, WPA2-PSK & Enterprise ( EAP, PEAP, LEAP ), 802.11i (includes hardware-accelerated Advanced Encryption Standard [AES] ), 802.1x supplicant
|
10/100/1000 Mbps Ethernet RJ45 Copper
|
Models with 2x 10/100/1000 Ports
|
IRG5520
IRG5521
|
IRG5520+
IRG5521+
|
IRG5521+ FN
|
Models with 4x 10/100/1000 Ports
|
IRG5540
IRG5541
|
IRG5540+
IRG5541+
|
IRG5541+ FN
|
Speed
|
Software selectable 10/100/1000 Ethernet, Auto
Software selectable Half/Full/Auto duplex
|
Ethernet Isolation
|
1.5Kv Magnetic
|
Standards
|
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow Control
|
Processing Type
|
Store and Forward
|
MAC Address Table Size
|
8K
|
VLAN ID range
|
1 to 4000
|
USB
|
USB-C
|
1 x USB 3.2 Type-C with a transfer rate up to 5Gbps
Console Port or Ethernet over USB
|
Serial
|
RS232 Serial
|
1 x RS232 DB9 female connector
Serial Port Speeds: 50bps to 230Kbps with customizable baud rate support
Data Bits: 5,6,7,8-bit protocol support
Parity: Odd, Even, Mark, Space, None
Flow Control: Hardware, Software, Both, None
Serial Port Protection: 15Kv Electrostatic Discharge Protection ( ESD )
Processing Type - Store and Forward
|
RS485 Serial
|
half-duplex
|
Power and Auxillary Connectors
|
One GPIO Input
|
Digital Input & Pulse Counting VDC: 0 for ≤ 1V, 1 for ≥ 2.7V
Dry Contact Max Current range: min 0.6mA @ 7V and max 3.5mA @ 36V
Current Sink Output: 0.5A @ 12v
|
Ignition Sense
|
Analog Input: 0.5V to 36V
|
Two Digital Inputs
|
Digital Input & Pulse Counting VDC: 0 for ≤ 1V, 1 for ≥ 2.7V
|
One Alarm Relay
|
Normally Open (NO) dry contact: 1A @ 24VDC
|
Platform Specifications
|
Microprocessor
|
Dual Core Cortex-A53 64bit ARMv8 1.2GHz
|
RAM
|
1GB DDR4
|
Flash
|
4GB MMC
|
LED Indicators
|
Power: indicates power status
|
Serial: indicates serial RS232 connection status and Tx data
|
WWAN: indicates Wireless Wide Area Network status
|
GNSS: indicates Global Navigation Systems for GPS, Galileo, Glonas and Beidou status
|
VPN: indicates VPN presence (for Router Models: IRG5520x & IRG5540x only)
|
WLAN: indicates Wireless Lan status (for Router Models: IRG5521x & IRG5541x only)
|
Internet: indicates Internet connectivity
|
Environmental Specifications
|
Operating Temperature: -40°C to 70°C / -40°F to 158°F
|
Storage Temperature: -40°C to 85°C / -40°F to 185°F
|
Operating Humidity: 0% to 95% non-condensing
|
Storage Humidity: 0% to 95% non-condensing
|
Operating Altitude: 3048 m / 10,000 ft
|
Cooling: EN 60068-2-1
|
Dry heat: EN 60068-2-2
|
Damp: EN 60068-2-30
|
MTBF (no Wi-Fi): > 234,435 hours
MTBF (with Wi-Fi): > 192,137 hours
(Calculation model based on MIL-HDBK-217-FN2 @ 30°C/86°F)
|
Heat Output (BTU/HR)
|
Enclosure
|
Die Cast Aluminium
|
Mounting
|
Desktop, Panel, or wall mount
DIN Rail attachement bracket is optional.
(Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175 vertically or horizontally)
|
Ingress Protection Rating
|
IP54
|
Power
|
Power Input
|
12/24 VDC Nominal (7 to 36 VDC Range)
|
Ignition Sense
|
VDC voltage variation with On/Off and timer
|
External Power Supply (optional)
|
110 / 220 VAC Power supply
|
Power Connector
|
|
Max Power/Current Consumption
|
Ignition Off (all power is switched off, but Vin connected):
xxmW / xx mA
Standby Mode (CPU and radio are off, with GPIO sense on):
xxmW / xx mA
On Mode (CPU and Radio are on with no traffic):
- Typical Idle (no Wi-Fi): xxmW / xx mA
- Typical Idle (Wi-Fi): xxmW / xx mA
- Max (no Wi-Fi): xxmW / xx mA
- Max (with Wi-Fi): xxmW/xxmA
- Inrush Current (no Wi-Fi): xxA @ 12 VDC averaged over 100 micro seconds
- Inrush Current (with Wi-Fi): xxA @ 12 VDC averaged over 100 micro seconds
|
Power Line Protection
|
Surge: 8KV (EN61000-4-5 common mode), 2KV (EN61000-4-5 differential and common modes)
|
Reverse polarity protection
|
YES
|
Vehicle Transient voltage protection
|
Built-in protection against voltage transient including 5 VDC engine cranking and +200 VDC load dump
|
Weight & Dimensions
|
Product Weight & Dimensions
|
Weight: 0.59 Kg / 1.30 lb
|
Dimensions: 146 x 99 x 45 mm / 5.75 x 3.89 x 1.77 in
|
Shipping Weight & Dimensions
|
Weight (with Antenna): 1 Kg / 2.20 lb
Weight (without Antenna): 0.79 Kg / 1.74 lb
|
Dimensions: 270 x 170 x 70 mm / 10.63 x 6.70 x 2.75 in
|
Regulatory Approvals
|
IRG5500
|
IRG5500+
|
IRG5500+ FN
|
Cellular/Telecom Regulatory Approvals
|
FCC/ICES, RED, PTCRB/CTIA, CE
|
FCC/ICES, PTCRB/CTIA
|
Carrier Certifications
|
Verizon, AT&T
|
AT&T
|
Shock & Vibration
|
SAE J1455 (Vibration: Section 4.10.4.1 and 4.10.4.2 Cab Mount, Shock: Section 4.11.3.4 Operational Shock)
|
MIL-STD-810G (Shock: test method 516.6. Operational Vibration: test method 514.6)
|
EN 61373 (Shock, Vibration long-life / functional-random)
|
Hazloc
|
IECEx/IECx, ATEX Class 1 Zone 2, Directive 2014/34/EU
|
ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D, ISA 12.12.01-2015
|
Vehical Usage
|
E-Mark (UN ECE Regulation 10.04, ISO 7637-2:2011 and ISO 16750-2:2012 )
|
Velocity
|
< 100m/s
|
Railway
|
EN 50155: 2017 Clause 4.3.6
|
EN 50121-1: 2017
|
EN 50121-3-2: 2016
|
EN 50121-4: 2016
|
IEC 60571:2012 For Clause 12.2.8 & 12.2.9
|
IEC 62236-1: 2018
|
IEC 62236-3-2: 2008
|
IEC 62236-4: 2018
|
Emissions
|
FCC 47 Part 15 Subpart B, Class B
|
ICES-003 Issue 6 Class B (Canada)
|
FCC Part 15.247 Subpart C ( 2.4 Ghz)
|
FCC Part 15.407 Subpart E ( 5 Ghz)
|
ANSI C63.4 Class B (Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz)
|
EN61000-3-2: 2014 (Limits for Harmonic Current Emissions)
|
EN61000-3-3: 2013 (Limits of Voltage Fluctuations and Flicker)
|
CISPR 32:2015/EN 55032:2015 Class B (Electromagnetic compatibility of multimedia equipment - Emission requirements)
|
Immunity
|
CISPR 25:2016/EN55025: (Vehicles, boats and internal combustion engines - RDC)
|
CISPR 35:2016/EN 55035:2017 (IR)
|
EN 61000-4-2:2009 (ESD)
+/-8 kV (Contact)
+/-15 kV (Air)
Operating mode: powered on
|
EN 61000-4-3: 2006 + A1:2007 + A2:2010(RS)
|
EN 61000-4-4:2012 (EFT) 2 KV (Criteria A)
|
EN 61000-4-5:2014+AMD1:2017 (Surge) 2KV (line to earth), 1.5KV (line to line)
|
EN 61000-4-6: 2013 (CS)
|
EN 61000-4-8: 2009 (PFMF)
|
EN 61000-4-9: 2016 (PMF)
|
EN 61000-4-11: 2004 + A1:2017
|
EN 61000-4-16
|
EN 61000-6-4: 2007 + A1: 2011
|
ISO 7637-2:2004
|
Electrical Safety
|
UL 61010-1 and UL 61010-2-201, IEC 61010-1:2010+AMD1:2016, IEC 61010-2-201:2017 (includes CB)
|
UL/ULC/EN 62368-1, IEC 62368-1:2018 (includes CB)
|
CAN/CSA C22.2 No. 62368-1-14, IEC 62368-1:2018
|
Cellular / WWAN Radio Standards
|
EN 300 328 (V2.1.1:2019), ETSI EN 300 328 V2.1.1 (2016-11) (Electromagnetic compatibility)
|
EN 301 893 (V1.8.1:2015), ETSI EN 301 893 V2.1.1 (2017-05) (Radiated spurious emissions)
|
EN 301 489-1 (V2.1.1:2017-02), ETSI EN 301 489-1 V2.1.1 (2017-02)
|
EN 301 489-17 (V3.2.0:2017-03), ETSI EN 301 489-17 V3.1.1 (2017-02)
|
EN 301 489-19 (V2.1.1:2019)
|
EN 301 908-1 v11.1.7:2018-12, ETSI EN 301 908-1 V7.1.1 (2015-03) (Radiated emissions RF control and monitoring)
|
EN 301 908-2 v11.1.2:2017-08, ETSI EN 301 908-2 V11.1.2 (2017-08) (RF conducted)
|
EN 301 908-13 v11.1.2:2017-07, ETSI EN 301 908-13 V11.1.2 (2017-07) (RF Conducted)
|
EN 62311:2019, IEC 62311 Ed. 1.0 b:2007 (Human exposure restrictions for radio frequency electromagnetic fields)
|
Environmental Specifications
|
Reach, RoHS3, and WEEE Compliant
|
Other
|
ECCN
|
5A992
|
HTSUS Number
|
8517.62.0050
|
Warranty
|
2 Years
|
|
|
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
Features
All features and functionality are included in the base price of the product. There are no additional costs or fees.
Functionality
|
Gateway (IP Passthrough Bridging), Switching, Routing
|
Routing Protocols
|
IPv4/IPv6, Static Routing, RIP/RIPNg, NAT, OSPFv3, BGP-4,
IPv6 Encapsulations (GRE, 6in4), Port Routing
|
IP Applications
|
DDNS, DNS Proxy / Spoofing, relay, client, Opt. 82,
|
NTP & SNTP (versions 1, 2, 3, 4) with support from GPS, GNSS & Network Carrier timing
|
DHCP / DHCPv6 server & BOOTP for automated network-based setup
|
VLAN & VPN
|
VLAN, IPSec, OpenVPN, VPN Failover (16 concurrent VPN tunnels)
|
GPS & GNSS Reports
|
GPS for tracking equipment over RS232, USB, and Ethernet
|
NMEA 0183 v3.0, TAIP, CSV
|
Firewall & Security
|
Built in Zone-Based Policy Firewall
|
ACL (list & ranges & time)
|
Filter based IP, Port, Protocol, User
|
AAA, Radius, TACACS+
|
802.1x
|
Certificate Support (X.509)
|
Port Forwarding
|
BGP Communities
|
Security Features
|
Security via remote authentication (Radius and TACACS+)
|
Trusted host filtering (IP filtering), allowing only those hosts that have been configured in the host table access to the router.
|
Idle LTE port timers, which close a connection that has not been active for a specified period of time
|
Ability to disable services (for example, Telnet, TruePort, Syslog, SNMP, Modbus, HTTP) for additional security
|
Ability to individually disable network services that won’t be used by the SSH client/server connections
(SSH 1 and SSH 2)
|
Logging via syslog
|
Ability to disable Ping responses
|
Ability to setup Access Lists (ACL’s) to restrict traffic
|
Ability to set up firewalls to restrict incoming and outgoing packets
|
SSH client/server connections (SSH 1 and SSH 2)
|
SSL/TLS client/server data encryption (TLSv1/1.1/1.2 and SSLv2)
|
Ability to setup Virtual Private Networks (VPNs)
|
Wireless Security; WEP, WPA2-PSK & Enterprise (EAP, PEAP, LEAP), 802.11i
|
Wireless cellular security using PAP or CHAP authentication
|
Dynamic DNS with DYNDNS.org
|
Domain Name Server (DNS) support
|
Email alert notification
|
SSH connections (supported ciphers are Blowfish, 3DES, AES-CBC, AES-CTR, AES-GMC, CAST, Arcfour and ChaCha20-Poly1305)
|
SSL/TLS connections
|
RIP authentication (via password or MD5)
|
OSPF
|
2F Authentication
|
Management Access Control
|
SNMPv3
|
DMZ
|
FIPS 140-2
|
Secure HTTP/HTTPS/FTP/Telnet Authentication Proxy
|
Logging, Reporting & Alerts
|
Sys Log, Event Type, Report Type, Alerts & Monitoring, Triggers Status Screen Report, Data Usage, Diagnostic
|
Management
|
PerleVIEW Management, WEB (HTTP/HTTPS), SNMPv1/v2/v3, SMS Control, Load Balancing, CLI, Login Banner, E-mail, Ping, Telnet, FTP, Connection on Demand
|
Automatic check for software updates.
|
Software updates available over FTP, HTTP, HTTPS, SCP, SFTP, and TFTP
|
Power Management (General)
|
Power Processor Saving Mode – this feature optimizes idle power consumption, saving energy by reducing performance where possible.
|
Power Saving Features including; LED power saving mode, Smart Standby Mode, Power saving strategies such as turning off unused interfaces (USB, Serial, Ethernet), turning off GPS and adjusting the Ethernet rate.
|
Operating Power Modes
- Standard – When power is applied to the router, it will power up. All inputs are ignored (from a power up and Smart Standby perspective). This is the default.
- Smart Standby Mode – you can configure a combination of one or two user defined conditions to determine when the router is powered up and when it goes into Smart Standby Mode.
|
Power Management (Ignition Sense)
|
Configurable time delay for shutdown / start based on vehicle ignition status
|
Low Voltage Standby function to prevent battery drain
|
Operating Power Mode (Ignition mode) – this mode monitors the ignition input and goes in and out of Smart Standby based on the voltage of the ignition input. When the voltage on the ignition input goes below a user pre-defined threshold, the router will be powered down into Smart Standby Mode. When the voltage on the ignition input goes above the Perle Wireless LTE Router pre-defined value the power will be restored. You can configure a combination of inputs and schedule to control Smart Standby Mode.
|
GPIO Capabilities
|
One GPIO configurable as high side pull-up / dry contact, analog input, digital input, low side current sink output, digital output/open drain, or Pulse Counter.
|
One GPIO configurable as Vehicle ignition sense or analog input
|
Two Digital Inputs configurable as high side pull-up / dry contact, digital input, or Pulse Counter
|
One normally open (NO) relay contact
|
Serial Port Capabilities
|
Access: connect directly using Telnet / SSH
|
Terminal Server: Telnet, SSH v1 and v2, Rlogin, Auto session login, LPD, RCP printer
|
Serial to Ethernet: Tunnel raw serial data across Ethernet - clear or encrypted, RAW serial data over TCP/IP/UDP, packetized data, virtual modem, TruePort com/tty redirector, TrueSerial packet technlogy, RFC2217 transport & RS232 control signals
|
Industrial Porotocls Encapsulations: ModBus, DNP3 and IEC-870-5-101, ModBus TCP Gateway
|
Remote Access: PPP, PAP/CHAP, SLIP
|
|
|
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif)
|