Perle 10040668 - Express Systems & Peripherals

Home > Perle > Perle PoE Injectors >

10040668

See any errors on this page?
Please let us know.

Perle INJ 2113-T DIN Rail Hi-PoE Injector with surge protection: 60 W Type 3 Hi-PoE compliant, (1) RJ45 socket, (1) push-in terminal block, 10/100/1000 Mbps, IP20, potential separation, shield contacting with strain relief & shield current monitoring

MSRP: $876.00

ESP Price: $702.00

Contact us for Partner Pricing. (more info)

Availability: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: 10040668

Description

Technical Specs

Drivers & Downloads

INJ 2100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. In environments vulnerable to voltage surges, it acts as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliantpower over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-2100-T units are protected against short circuits on the PoE side. The integrated surge protection increases system availability by protecting the connected end devices.

Generating up to 60 Watts, the INJ-2100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE.

With the INJ-2100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable

Documentation

PDF Data Sheet

PDF User Manual

INJ 2101-T 27030118	INJ 2111-T 27030138	INJ 2102-T 27030128	INJ 2112-T 27030148	INJ 2103-T 10040658	INJ 2113-T 10040668
Serial Interface
Interface 1	Ethernet
Connection method	Screw terminal block		IDC connection		Push-in connection
Transmission length	100 m (including patch cables)
Conductor cross section solid min.	0.14 mm²				0.2 mm²
Conductor cross section solid max.	1.5 mm²		0.34 mm²		1.5 mm²
Conductor cross section flexible min.	0.14 mm²				0.2 mm²
Conductor cross section flexible max.	1.5 mm²		0.34 mm²		1.5 mm²
Conductor cross section AWG min.	28		26
Conductor cross section AWG max.	16		22		16
Torque	0.22 Nm...0.25 Nm
Stripping length	5 mm				8 mm
Pin assignment	1:1
Basic functions	PSE/Midspan, compliant with IEEE 802.3af, at
Serial transmission speed	10/100/1000 Mbps
Output nominal voltage	54 V DC (PoE)
Output power	30 W	60 W	30 W	60 W		30 W
Maximum output power	40 W	75 W	40 W	75 W		40 W
Interface 2	Ethernet
Connection method	RJ45 CAT5e
Wire diameter incl. insulation			1.6 mm (Terminal block is tested with PVC insulation - other insulation materials available on request)
Ambient conditions
Ambient temperature (operation)	-40 °C ... 75 °C
Ambient temperature (storage/ transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Altitude	5000 m (For restrictions see manufacturer's declaration)
Degree of protection	IP20 (Manufacturer's declaration)
General
Electrical isolation	VCC // SCM + FE // PoE
Test voltage data interface/power supply	1.5 kV AC (50 Hz, 1 min.)
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Mounting position	Vertical
Net weight	324.72 g
Housing material	Plastic
Color	Gray
MTTF (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day))	1510 Years	1797 Years	1510 Years	1797 Years		1510 Years
MTTF (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))	661 Years	733 Years	661 Years	733 Years		661 Years
MTTF (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))	256 Years	283 Years	256 Years	283 Years		256 Years
Conformance	CE-compliant
UL, USA	UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, USA/Canada	Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
UL, USA/Canada	Class I, Division 2, Groups A, B, C, D
UL, Canada	CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Standards and Regulations
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Type of test	Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result	10 Hz ... 57 Hz, amplitude ±3.5 mm, 57 Hz ... 150 Hz, 5g
Type of test	Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result	30g for 11 ms, three shocks in each spatial direction
Type of test	Continuous shock according to EN 60068-2-27/IEC 60068-2-27
Test result	10g for 16 ms, 1000 shocks in each spatial direction
Standards/ regulations	EN 61000-4-2
Contact discharge	± 6 kV (Test Level 3)
Indirect discharge	± 6 kV
Standards/ regulations	EN 61000-4-3
Frequency range	80 MHz ... 3 GHz (Test Level 3)
Standards/ regulations	EN 61000-4-4
Comments	Criterion B
Standards/ regulations	EN 61000-4-5
Signal	± 1 kV (Data line, asymmetrical)
Signal	± 2 kV (I/O cable on field side only, asymmetric)
Standards/ regulations	EN 61000-4-6
Frequency range	0.15 MHz ... 80 MHz
Standards/ regulations	IEC 61643-21
IEC test classification	C2
Conformance	CE-compliant
UL, USA	UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, USA/Canada	Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
UL, USA/Canada	Class I, Division 2, Groups A, B, C, D
UL, Canada	CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Noxious gas test	ISA-S71.04-1985 G3 Harsh Group A
Function
Designation	Shield current monitoring
Switch-on threshold	≥ 30 mA
Local diagnostics	Yellow LED
Precision	± 5 %
Response time	3 s
Continuous shield current	≤ 2 A
Power consumption	270 mW (Shield current monitoring)
Dimensions
Width	30.2 mm
Height	130 mm
Depth	120 mm
Note
Utilization restriction	EMC: class A product, see manufacturer's declaration in the download area
Power Supply
Nominal supply voltage	24 V DC
Nominal supply voltage	48 V DC
Supply voltage range	18 V DC ... 57 V DC
Max. current consumption	2.1 A	4.2 A	2.1 A	4.2 A		2.1 A
	1.4 A (24 V DC)	2.73 A (24 V DC)	1.4 A (24 V DC)	2.73 A (24 V DC)		1.4 A (24 V DC)
	0.7 A (48 V DC)	1.34 A (48 V DC)	0.7 A (48 V DC)	1.34 A (48 V DC)		0.7 A (48 V DC)
Power consumption	≤ 75 W
Protective circuit	Reverse polarity protection
Conductor cross section flexible max.	4.00 mm²
Conductor cross section flexible min.	0.75 mm²
Conductor cross section solid max.	4.00 mm²
Conductor cross section solid min.	0.75 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	20
Approvals
	cULus Listed cUL Listed UL Listed
Environmental Product Compliance
REACH SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 50		Environmentally friendly use period: unlimited = EFUP-e