Perle 27030078 - Express Systems & Peripherals

Home > Perle > Perle PoE Injectors >

27030078

See any errors on this page?
Please let us know.

Perle INJ 1010 DIN Rail PoE Injector: 60 W Type 3 Hi-PoE compliant, (2) RJ45 sockets, 10/100/1000 Mbps & IP20

MSRP: $519.00

ESP Price: $416.40

Contact us for Partner Pricing. (more info)

Availability: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: 27030078

Description

Technical Specs

Drivers & Downloads

INJ 1000 PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable.

Generating up to 60 Watts, the INJ 1000 provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE.

With the INJ 1000, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

INJ 1000 PoE Injector Benefits

DIN Rail Enclosure	Easily mount on a DIN rail or inside distribution boxes using native DIN Rail enclosure with grounding clip. No need for add-on brackets.
Power Over Ethernet ( PSE )	Performs the Power Sourcing Equipment ( PSE ) function on 1 UTP port for IEEE 802.3af (up to 15.4 watts PoE), IEEE 802.3at ( up to 30 watts PoE+ ) or IEEE802.3bt (up to 60 watts Hi-PoE) compliant devices.
On-board PoE Power Controller	This PoE power controller provides compliant power provisioning and monitoring, properly sensing through signature detection whether or not the attach Ethernet devices are PoE capable or not. This provides a safe connection for both PoE and Non-PoE capable devices. Click here for more details
Advanced Power Management	PD signature detection Current limiting protection Over-Current Protection PD power classification detection ( Class 0,1,2,3,4,5,6 ) Reverse polarity protection

Documentation

PDF Data Sheet

PDF User Manual

INJ 1000 27030058	INJ 1000-T 27030068	INJ 1010 27030078	INJ 1010-T 27030088
Serial interface
Interface 1	Ethernet
Connection method	RJ45 socket
Transmission length	100 m (including patch cables)
Pin assignment	1:1
Basic functions	PSE/Midspan, compliant with IEEE 802.3af, at
Serial transmission speed	10/100/1000 Mbps
Output nominal voltage	54 V DC (PoE)
Output power	30 W		60 W
Interface 2	Ethernet
Connection method	RJ45 CAT5e
Ambient conditions
Ambient temperature (operation)	0°C ... 60°C	-40°C ... 75°C	0°C ... 60°C	-40°C ... 75°C
Ambient temperature (storage/transport)	-40°C ... 85°C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Altitude	5000 m (For restrictions see manufacturer's declaration) / 2000 m (With UL approval)
Degree of protection	IP20 (Non-certificated by UL)
General
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Mounting position	vertical
Net weight	396.6 g	377.8 g	380.8 g	380.6 g
Housing material	Plastic
Color	Gray
Conformance	CE-compliant
UL, USA/Canada	Class I, Div. 2, Groups A, B, C, D, T4
Standards and Regulations
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Type of test	Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result	10 Hz ... 57 Hz, amplitude ±3.5 mm, 57 Hz ... 150 Hz, 5g
Type of test	Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result	30g for 11 ms, three shocks in each spatial direction
Type of test	Continuous shock according to EN 60068-2-27/IEC 60068-2-27			Continuous shock according to EN 60068-2-27/IEC 60068-2-27
Test result	10g for 16 ms, 1000 shocks in each spatial direction
Standards/regulations	EN 61000-4-2
Contact discharge	± 6 kV (Test Level 3)
Indirect discharge	± 6 kV
Standards/regulations	EN 61000-4-3
Frequency range	80 MHz ... 3 GHz (Test Level 3)
Standards/regulations	EN 61000-4-4
Comments	Criterion B
Standards/regulations	EN 61000-4-5
Signal	± 1 kV (Data line, asymmetrical)
Signal	± 2 kV (I/O cable on field side only, asymmetric)
Standards/regulations	EN 61000-6-4
Standards/regulations	EN 61000-4-6
Frequency range	0.15 MHz ... 80 MHz
Conformance	CE-compliant
UL, USA/Canada	Class I, Div. 2, Groups A, B, C, D, T4
Noxious gas test	ISA-S71.04-1985 G3 Harsh Group A
Dimensions
Width	30.2 mm
Height	130 mm
Depth	120 mm
Note
Utilization restriction	EMC: class A product, see manufacturer's declaration in the download area			EMC: class A product, see manufacturer's declaration in the download area
Power supply
Nominal supply voltage	24 V DC
Nominal supply voltage	48 V DC
Supply voltage range	18 V DC ... 57 V DC (Ordinary locations)
Supply voltage range	24 V DC ... 48 V DC (Hazardous locations)
Max. current consumption	2.1 A
	1.4 A (24 V DC)		2.73 A (24 V DC)
	0.7 A (48 V DC)		1.34 A (48 V DC)
Power consumption	≤ 75 W
Protective circuit	Reverse polarity protection
Conductor cross section flexible max.	4.00 mm²
Conductor cross section flexible min.	0.75 mm²
Conductor cross section solid max.	4.00 mm²
Conductor cross section solid min.	0.75 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	20
Approvals
cULus Listed cUL Listed UL Listed
Environmental Product Compliance
REACH SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 10;