 |
 |
 |
|
PortServer TS P MEI serial servers make it easy to connect RS-232/422/485
serial devices to an IP network. By supporting versatile powering options like
powered Ethernet and powered serial, they can adapt to many applications where
traditional power alternatives are required. Available in one-, two- and
four-port versions, PortServer TS P MEI delivers universal, high performance
multiport serial-to-Ethernet connectivity.
Powered Ethernet (802.3af, mid- and end-span support) makes it possible to
run just one Ethernet cable to the device server for both power and
communications. The powered serial feature enables PortServer TS P MEI to power
a device over serial using Ring Indicator (RI) or DTR pins, or it can be powered
itself using RI (Port 1 only). Each power feature is available in addition to a
traditional power connector, and can serve as redundant power in case of an
outage from either source.
Available in one-, two- and four-port versions, PortServer TS P MEI serial
servers deliver universal, high performance multiport serial-to-Ethernet
connectivity. It is ideal for applications requiring COM ports, serial
tunneling, or where TCP/UDP Socket functionality is needed.
| Specifications |
PortServer® TS 1 P MEI |
PortServer® TS 2 P MEI |
PortServer® TS 4 P MEI |
| Features |
| Management |
HTTP/HTTPS, CLI, SNMP (read/write), Digi Port Authority-Remote
management diagnostics and auto-discovery tool |
| Protocols |
UDP/TCP, PPP, DHCP/RARP/ARP-Ping for IP Address assignment,
Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol
conversion support |
| Software |
Device-initiated patented RealPort® with encryption COM port
redirector |
| Security |
SSHv2 |
| Status LEDs |
Link, Power |
| Operating Systems |
AIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6,
Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows
Server® 2008, Windows Vista®
Note: TCP/UPD Socket Services are operating
system independent |
Dimensions
(L x W x D) |
5.25 in x 3.33 in x 0.95 in (13.34 cm x 8.46 cm x 2.42
cm) |
| Weight |
2.25 oz (64.00 g) |
| Other |
802.3af powered Ethernet (mid- and end-span); Full modem and
hardware flow control, Modem emulation, Port buffering, RJ-45/DB-9F crossover
cable included for optional serial configuration |
| Interfaces |
| Serial |
| Ports |
1 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput;
Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD |
2 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput;
Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
|
4 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput;
Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
|
| Ethernet |
| Ports |
1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half
duplex |
| Power Requirements |
| Power Input |
9-30 VDC |
| Power Supply (included) |
North America: 12 VDC/.5A max out; 120 VAC in (wall mount)
International: 12 VDC/.5A max out; 100-240 VAC in (small brick) |
| Power Consumption |
Typical: 4 W; Max: 6 W |
| Surge Protection |
4 kV burst (EFT) per EN61000-4-4, 2 kV surge per
EN61000-4-5 |
| Powered Ethernet |
Ethernet Power, IEEE 802.3af compliant, pins 4/5(+) and 7/8(-); 4
kV burst (EFT) per 1000-4-4; 2 kV surge per EN61000-4-5 |
| Serial Power Input |
DC input connector, 9-30 VDC, 525 mA max; Serial Port 1, Pin 1
(RI), 9-30 VDC, 525 mA max |
| Serial Power Output |
Available on all serial ports; 1 watt available power with
selectable voltage level; Pin 1 (RI) 5 VDC up to 200 mA max; Pin 9 (DTR) 9 VDC
up to 100 mA max |
| Environmental |
| Operating Temperature |
0° C to 50° C (32° F to 122° F) |
| Relative Humidity |
5% to 90% (non-condensing) |
| Ethernet Isolation |
1500VAC min per IEEE802.3/ANSI X3.263 |
| Serial Port Protection (ESD) |
+15 kV air 6 AP and +8 kV contact discharge per IEC
100-4-2 |
| Approvals |
| Safety |
UL 1950, CSA 22.2 No. 950 |
| Emissions/Immunity |
CE, FCC Part 15 (Class A), EN55024, EN55022 Class A |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- End-span and mid-span PoE (Power over Ethernet)
- Device server with 2 or 4 RS-232/422/485 serial ports
- Serial port expansion for medical, healthcare, telehealth
- Serial-to-Ethernet connectivity
|
|
|
|
|
|
|