 |
 |
 |
|
The ABC-01-M12 configuration backup and restoration tool is designed with M12 connector that can be used to save and load the configuration of Moxa's ToughNet series EN50155 managed Ethernet switches through the switches' RS-232 console port. This simple yet powerful tool makes it much easier to back up a switch's system parameters, or even replace an existing switch with a new switch. With the ABC-01, you can quickly re-install a substitute switch (of the same model) or recover the entire system configuration, including IP address, if a switch failure occurs.
| • Basic Operation |
| Power Requirements |
3 to 5 VDC (through the RS-232 port's RTS signal) |
| Configuration |
Use the web console of Moxa's managed switches |
| Connectors |
RS-232 M12 port |
| • Power Requirements |
| Power Input |
3 to 5 VDC (through RS-232 RTS) |
| • Physical Characteristics |
| Enclosure |
PVC molding, IP40 protection |
| Dimensions |
32.5 x 97 x 12 mm (8.07 x 3.82 x 0.47 in) |
| Weight |
ABC-01-M12: 60 g |
| On-Switch Installation |
M4 screw (< 4 mm) |
| Cable Length |
35 cm (including connector) |
| • Environmental Limits |
| Operating Temperature |
0 to 60°C (32 to 140°F) |
| Storage Temperature |
-20 to 70°C (-4 to 158°F) |
| Ambient Relative Humidity |
5 to 95 % (non-condensing) |
| • Regulatory Approvals |
| EMI |
FCC Part 15, CISPR (EN55022) Class A |
| EMS |
EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3 |
| • Warranty |
| Warranty Period |
5 years |
|
|
|
 |
|
 |
|