Introduction
The AWK-1131A industrial wireless AP/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-1131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply. The AWK-1131A can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.
Improved Higher Data Rate and Channel Capacity
High-speed wireless connectivity with up to 300 Mbps data rate
MIMO technology to improve the capability of transmitting and receiving multiple data streams
Increased channel width with channel bonding technology
Supports flexible channel selection to build up wireless communication system with DFS
Specifications for Industrial-grade Applications
Redundant DC power inputs
Integrated isolation design with enhanced protection against environmental interference
Compact aluminum housing, IP30-rated
WLAN Interface
WLAN Standards
802.11a/b/g/n
Modulation Type
Frequency Band for US (20 MHz operating channels)
2.412 to 2.462 GHz (11 channels)
Frequency Band for EU (20 MHz operating channels)
2.412 to 2.472 GHz (13 channels)
Frequency Band for JP (20 MHz operating channels)
2.412 to 2.484 GHz (14 channels)
Wireless Security
WEP encryption (64-bit and 128-bit)
Transmission Rate
802.11b: 1 to 11 Mbps
Transmitter Power for 802.11a
23±1.5 dBm @ 6 to 24 Mbps
Transmitter Power for 802.11n (5 GHz)
23±1.5 dBm @ MCS0/8 20 MHz
Transmitter Power for 802.11b
26±1.5 dBm @ 1 Mbps
Transmitter Power for 802.11g
23±1.5 dBm @ 6 to 24 Mbps
Transmitter Power for 802.11n (2.4 GHz)
23±1.5 dBm @ MCS0/8 20 MHz
Transmitter Power
Transmitter Power
Receiver Sensitivity for 802.11a (measured at 5.680 GHz)
Typ. -90 @ 6 Mbps
Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)
Typ. -69 dBm @ MCS7 20 MHz
Receiver Sensitivity for 802.11b (measured at 2.437 GHz)
Typ. -93 dBm @ 1 Mbps
Receiver Sensitivity for 802.11g (measured at 2.437 GHz)
Typ. -88 dBm @ 6 Mbps
Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)
Typ. -70 dBm @ MCS7 20 MHz
WLAN Operation Mode
Access point, Client, Sniffer
Antenna
External, 2/2 dBi, Omni-directional
Antenna Connectors
Ethernet Interface
Standards
IEEE 802.3 for 10BaseT
10/100/1000BaseT(X) Ports (RJ45 connector)
Ethernet Software Features
Management
DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXconfig
Security
Time Management
Firewall
Filter
ICMP, MAC address, IP protocol, Port-based
LED Interface
LED Indicators
PWR, FAULT, STATE, SIGNAL, WLAN, LAN
Physical Characteristics
Housing
IP Rating
Dimensions
58 x 115 x 70 mm (2.29 x 4.53 x 2.76 in)
Weight
Installation
DIN-rail mounting, Wall mounting (with optional kit)
Power Parameters
Input Current
0.56 A @ 12 VDC, 0.14 A @ 48 VDC
Input Voltage
Power Connector
1 removable 4-contact terminal block(s)
Power Consumption
Reverse Polarity Protection
Environmental Limits
Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
EMC
EMI
CISPR 32, FCC Part 15B Class B
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
Radio
EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC
Safety
Vibration
Features
IEEE 802.11a/b/g/n AP/client support
Millisecond-level Client-based Turbo Roaming Integrated antenna and power isolation 5 GHz DFS channel support
