 |
 |
 |
|
The EDS-405A/408A-PN are 5 and 8-port managed Ethernet switches with
PROFINET enabled. With embedded PROFINET, the PN switches can be easily
integrated into the Simatic Step 7 engineering tool. It is more
convenient for automation engineers to configure through Step 7 and
monitor with automation HMIs. The EDS-405A/408A-PN switches with fast
booting, Turbo Ring and Turbo Chain fast-recovery technology, can
optimize PROFINET network performance. Moxa’s PROFINET switches also
support a variety of useful management functions, such as IGMP snooping,
IEEE 802.1Q VLAN, QoS, port mirroring, SNMP, bandwidth management, and
warning by email or relay.
|
• Technology
|
|
Standards
|
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
|
|
Protocols
|
IGMPv1/v2,
GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, TFTP, SNTP, SMTP, RARP,
RMON, HTTP, Telnet, Syslog, DHCP Option 66/67/82, BootP, LLDP, PROFINET,
EtherNet/IP, Modbus/TCP, IPv6, NTP Server/Client
|
|
MIB
|
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
|
|
Flow Control
|
IEEE 802.3x flow control, back pressure flow control
|
|
• Switch Properties
|
|
MAC Table Size
|
2 K (EDS-405A-PN), 8 K (EDS-408A-PN)
|
|
Packet Buffer Size
|
1 Mbit
|
|
• Interface
|
|
RJ45 Ports
|
10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
|
|
Console Port
|
RS-232 (RJ45 connector)
|
|
DIP Switches
|
Turbo Ring, Master, Coupler, Reserve
|
|
LED Indicators
|
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M
|
|
Alarm Contact
|
1 relay output with current carrying capacity of 1 A @ 24 VDC
|
|
• Power Requirements
|
|
Input Voltage
|
24 VDC (12 to 45 VDC), redundant dual inputs
|
|
Input Current
|
EDS-405A-PN: 0.24 A @ 24 V
EDS-408A-PN: 0.26 A @ 24 V
|
|
Overload Current Protection
|
Present
|
|
Connection
|
1 removable 6-contact terminal block
|
|
Reverse Polarity Protection
|
Present
|
|
• Physical Characteristics
|
|
Housing
|
Metal, IP30 protection
|
|
Dimensions
|
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
|
|
Packing Size
|
19.2 x 16.8 x 9.3 cm
|
|
Weight
|
650 g
|
|
Packing Weight
|
EDS-405A-PN series: 1140 g
EDS-408A-PN series: 1220 g
|
|
Installation
|
DIN-Rail mounting, wall mounting (with optional kit)
|
|
• Environmental Limits
|
|
Operating Temperature
|
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
|
|
Storage Temperature
|
-40 to 85°C (-40 to 185°F)
|
|
Ambient Relative Humidity
|
5 to 95% (non-condensing)
|
|
• Standards and Certifications
|
|
Safety
|
UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN 60950-1**
|
|
Hazardous Location
|
UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nC IIC
|
|
EMI
|
FCC Part 15 Subpart B Class A, EN 55022 Class A
|
|
EMS
|
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8
|
|
Marine
|
DNV, GL
|
|
Traffic Control
|
NEMA TS2
|
|
Rail Traffic
|
EN 50121-4*
|
|
Shock
|
IEC 60068-2-27
|
|
Freefall
|
IEC 60068-2-32
|
|
Vibration
|
IEC 60068-2-6
|
|
* EDS-405A/408A-PN ** EDS-408A-PN only Note
|
Please check Moxa’s website for the most up-to-date certification status.
|
|
• MTBF (mean time between failures)
|
|
Time
|
EDS-405A-PN Series: 392,000 hrs
EDS-408A-PN Series: 363,000 hrs
|
|
Database
|
Telcordia (Bellcore), GB
|
|
• Warranty
|
|
Warranty Period
|
5 years
|
|
Details
|
See www.moxa.com/warranty
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Command Line Interface (CLI) for quickly configuring major managed functions
- IPv6 Ready logo awarded (IPv6 Logo Committee certified)
- DHCP Option 82 for IP address assignment with different policies
- Support EtherNet/IP and Modbus/TCP protocols for device management and monitoring
- PROFINET v2 conformance class B, GSD (General Station Description) v2, and SIMATIC STEP 7 device icons are available
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy
- IGMP snooping and GMRP for filtering multicast traffic
- Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
- QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism
- RMON for efficient network monitoring and proactive capability
- SNMPv1/v2c/v3 for different levels of network management security
- Bandwidth management to prevent unpredictable network status
- Port mirroring for online debugging
|
|
|
|
|
|
|