The HDR-60-24 Power Supply Series has been specifically designed for industrial applications. The small form factor makes it ideal for installation in limited spaces, and the devices have been built to operate between -30 to 70°C. The devices support AC input ranges from 85 to 264 VAC and conform to the EN 61000-3-2 standard, which the European Union uses to regulate harmonic current. Furthermore, the devices are equipped with constant current mode for overload protection.
Output Power Parameters
Wattage
Voltage
Current Rating
Ripple and Noise
Voltage Adjustment Range
Setup/Rise Time at Full Load
500 ms, 50 ms at 230 VAC
Typical Hold Up Time at Full Load
30 ms at 230 VAC
Input Power Parameters
Voltage Range
85 to 264 VAC (47 to 63 Hz)
Typical Efficiency
Typical Current
0.8 A @ 230 VAC, 1.2 A @ 115 VAC
Inrush Current (cold start)
60 A @ 230 VAC, 30 A @ 115 VAC
Overload Protection
Rated Output Power
Protection Type
Constant current limiting, recovers automatically after fault condition is removed
Overvoltage Protection
Over-Voltage Range
Protection Type
Shut down operating voltage, repower on to recover
Standards and Certifications
Safety
UL 508, EN 62368-1, UL 62368-1, IEC 62368-1
EMC
EN 55032/24, EN 61000-3-2 Class A, EN 61000-3-3
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
Physical Characteristics
Dimensions
52.5 x 90 x 54.5 mm (2.07 x 3.54 x 2.15 in)
Weight
Environmental Limits
Operating Temperature
-30 to 70°C (-22 to 158°F)
Storage Temperature
-40 to 85°C (-40 to 167°F)
Max. Operating Temperature at Full Load
Ambient Relative Humidity
20 to 90% (non-condensing)
