 |
 |
 |
|
MGate 4101-MB-PBS series products connect Modbus and PROFIBUS devices to provide PLCs (e.g. Siemens S400 and S300 PLCs) with remote maintenance capability. All models are ruggedly constructed with metal design, are DIN-rail mountable, and offer optional built-in optical isolation for serial signals.
Windows Utilities for Easy Setup and Traffic Monitoring
The QuickLink windows utilities makes configuration and operation of the MGate 4101-MB-PBS as easy as possible. The utility uses a serial console port to connect MGate 4101-MB-PBS unit. The QuickLink function can help you finish configuration in just few minutes by performing automatic commands detection and automatic memory mapping. In addition, an embedded monitoring tool can record all communication packets of Modbus devices and and assist in troubleshooting.
Redundant Power Inputs
The MGate 4101-MB-PBS has dual power inputs for greater reliability. The power inputs allow simultaneous connections to two live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus-to-PROFIBUS gateways ideal for demanding industrial applications.
Warning by Relay Output
A relay output is provided for the power input status. The relay output gives maintenance engineers an additional tool for troubleshooting and maintenance.
| PROFIBUS Interface |
| Protocol |
PROFIBUS DP-V0 Slave |
| Number of Ports |
1 |
| Data Rate |
9600 bps to 12 Mbps |
| Connector |
DB9 female |
| Isolation |
Built-in (2KV) |
| DIP Switch |
For Termination |
| Rotary Switch |
PROFIBUS address 0-99 (address 100-125 supported through software configuration) |
| • Modbus Serial Interface |
| Number of Ports |
1 |
| Serial Standards |
RS-232/422/485, software selectable |
| Connectors |
DB9 male |
| ESD Protection |
15 KV for all signals |
| RS-485 Data Direction Control |
ADDC® (automatic data direction control) |
| Pull High/Low Resistor for RS-485 |
1 KΩ, 150 KΩ |
| Terminator for RS-485 |
120 Ω |
| Data Bits |
7, 8 |
| Stop Bits |
1, 2 |
| Parity |
None, Even, Odd, Space, Mark |
| Flow Control |
RTS/CTS, DTR/DSR (RS-232 only) |
| Baudrate |
50 bps to 921.6 Kbps |
| • Serial Signals |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 |
Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w |
Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w |
Data+, Data-, GND |
| • Software |
| Operation Modes |
RTU Slave, RTU Master, ASCII Slave, ASCII Master |
| Configuration Options |
Serial Console, Windows Utility |
| Utilities |
MGate Manager for Windows 98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64 |
| Bonus Features |
QuickLink, Paging |
| • Physical Characteristics |
| Housing |
Metal |
| Weight |
500 g |
| Dimensions |
36 x 105 x 140 mm (1.42 x 4.13 x 5.51 in) |
| • Environmental Limits |
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| • Power Requirements |
| Input Voltage |
12 to 48 VDC |
| Power Connector |
Terminal block |
| Power Consumption |
MGate 4101-MB-PBS: 340 mA @ 12 VDC, 130 mA @ 48 VDC
MGate 4101I-MB-PBS: 375 mA @ 12 VDC, 140 mA @ 48 VDC |
| • Standards and Certifications |
| Safety |
UL 60950-1, EN 60950-1 |
| EMC |
CE, FCC |
| EMI |
EN 55022 Class A, FCC Part 15 Subpart B Class A |
| EMS |
EN 55024,
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,
EN 61000-4-11,
EN 61000-4-12 |
| Shock |
IEC 60068-2-27 |
| Freefall |
IEC 60068-2-32 |
| Vibration |
IEC 60068-2-6 |
| • Reliability |
| MTBF (mean time between failures) |
513,139 hrs |
| • Warranty |
| Warranty Period |
5 years |
Dimensions
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Protocol conversion between Modbus and PROFIBUS
- Windows utilities with innovative QuickLink function for automatic configuration
- Redundant dual DC power inputs and relay output supported
- Embedded data packet analyzer
- Powerful and visual diagnostic tool
- -40 to 75°C wide operating temperature models available
|
|
|
|
|
|
|
