 |
 |
 |
|
Moxa’s MiiNePort E3 series embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 Kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa’s innovative NetEZ technology, the MiiNePort E3 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E3 is a compact embedded device server with an RJ45 connector, making it easy to fit into virtually any existing serial device.
| Form Factor |
| Type |
Pin header module |
| Dimensions |
35 x 52.5 x 18 mm (1.38 x 2.07 x 0.71 in) |
| Weight |
12 g |
| • System Information |
| CPU |
32-bit ARM Core |
| RAM |
4 MB built in |
| Flash |
2 MB built in |
| • Ethernet Interface |
| Number of Ports |
1 |
| Speed |
10/100 Mbps, auto MDI/MDIX |
| Connector |
RJ45 (magnetic) |
| PoE Pass-through |
802.3af compliant |
| Magnetic Isolation Protection |
1.5 KV built-in |
| LEDs |
10BASE-T & 100BASE-TX Link Activity |
| • Serial Interface |
| Number of Ports |
1 |
| Transmission Format |
Standard TTL |
| • Serial Communication Parameters |
| Data Bits |
5, 6, 7, 8 |
| Stop Bits |
1, 1.5, 2 |
| Parity |
None, Even, Odd, Space, Mark |
| Flow Control |
RTS/CTS, DTR/DSR, XON/XOFF |
| Baudrate |
(non-standard baudrates supported)
MiiNePort E3: 50 bps to 230.4 Kbps
MiiNePort E3-H: 50 bps to 921.6 Kbps |
| • Serial Signals |
| TTL |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND |
| • Digital I/O Pins |
| GPIO |
4 configurable I/O pins |
| • Software |
| Network Protocols |
ICMP, ARP, IP, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP |
| Configuration Options |
Web Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility |
| Windows RealCOM Drivers |
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded |
| Fixed TTY Drivers |
SCO Unix, SCO OpenServer, UnixWare 7, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x |
| Linux Real TTY Drivers |
Linux kernel 2.4.x, 2.6.x, 3.0.x |
| Operation Modes |
RealCOM, TCP Server, TCP Client, UDP, Ethernet Modem, RFC2217 |
| NetEZ function |
EZPower, EZPage, SCM (Serial Command Mode), AutoCFG |
| • Environmental Limits |
| Operating Temperature |
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) |
-40 to 60°C (-40 to 140°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| • Power Requirements |
| Input Voltage |
3.3 to 5 VDC (±5%) |
| Power Consumption |
157 mA @ 3.3 VDC, 119 mA @ 5 VDC input max. |
| • Standards and Certifications |
| EMI |
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 |
| EMS |
EN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-8,
EN 61000-4-11 |
| Shock |
IEC-68-2-27 |
| Vibration |
IEC-68-2-6 |
| • Reliability |
| MTBF (mean time between failures) |
3,608,031 hrs |
| • Warranty |
| Warranty Period |
5 years |
The MiiNe—Moxa's 2nd Generation SoC
The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet
solution. The MiiNePort E3, which uses the MiiNe for its SoC, is a
compact embedded device server that has the lowest power consumption of
similar products. The MiiNe has the following features:
•Designed for serial-to-Ethernet applications
•Uses an ARM core
•Uses Moxa's own advanced UART technology
•2 MB Flash and 4 MB SDRAM memory built in
NetEZ Technology
Moxa's NetEZ technology gives serial device manufacturers a range of
powerful tools for integrating Ethernet capability into serial devices:
• EZPower: Need a module with a versatile system power input voltage? Use the MiiNePort E3’s EZPower for 3.3 to 5 VDC system power input.
• EZPage: Need a module that allows direct
communication with the attached serial device? Use the MiiNePort E3's
EZPage with Java Applet to create a visual webpage for configuring and
communicating with the attached serial device.
• SCM: Need an easy tool to configure the network
through serial communication inside the device? Try MiiNePort’s friendly
SCM (Serial Command Mode).
• AutoCFG: Tired of spending a large amount of time
setting up the device’s initial network configuration? Not anymore! The
MiiNePort’s AutoCFG makes auto-configuration during manufacturing
possible.
Moxa’s NetEZ technology makes the MiiNePort E3 the world’s most
user-friendly embedded device server by promising ease-of-use with
minimal integration work required.
Dimensions (Unit: mm (inch))
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- MiiNePort NetEZ Technology makes integration incredibly easy
- Use’s Moxa’s high quality and reliable second generation MiiNe SoC
- Versatile choice of operation modes fulfill specific application requirements
- Green design with extremely low power consumption
- 802.3af compliant PoE pass-through
- Highly compact embedded device module
|
|
|
|
|
|
|