 |
 |
 |
|
Moxa's NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa's embedded device servers can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, aReal COM driver is included for backward compatibility with legacy software.
|
Form Factor
|
|
Type
|
NE-4110/4120: Ready-to-go stand-alone modules
NE-4100T: 26-pin dual-in-line package
|
|
Dimensions
|
NE-4110/4120: 57 × 40 mm (2.24 x 1.57 in)
NE-4100T: 45 × 36 mm (1.77 x 1.42 in)
|
|
Weight
|
NE-4110S/4110A: 40 g
NE-4120S/4120A/4100T: 20 g
|
|
• Ethernet Interface
|
|
Number of Ports
|
1
|
|
Speed
|
10/100 Mbps, auto MDI/MDIX
|
|
Connector
|
NE-4110 Series: RJ45
NE-4120 Series: 5-pin pin header
NE-4100T: 26-pin dual-in-line
|
|
Magnetic Isolation Protection
|
1.5 KV built-in
|
|
• Serial Interface
|
|
Number of Ports
|
2
|
|
Serial Standards
|
• Port 1:
NE-4110S/4120S: RS-232
NE-4110A/4120A: RS-422, RS-485-4w, RS-485-2w
NE-4100T: TTL
• Port 2:
TTL console port
|
|
RS-485 Data Direction Control
|
ADDC® (automatic data direction control)
|
|
• Serial Communication Parameters
|
|
Data Bits
|
5, 6, 7, 8
|
|
Stop Bits
|
1, 1.5, 2
|
|
Parity
|
None, Even, Odd, Space, Mark
|
|
Flow Control
|
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
|
|
Baudrate
|
110 bps to 230.4 Kbps
|
|
• Serial Signals
|
|
TTL
|
• Port 1: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• Port 2: TxD, RxD, GND
|
|
RS-232
|
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
|
|
RS-422
|
Tx+, Tx-, Rx+, Rx-, GND
|
|
RS-485-4w
|
Tx+, Tx-, Rx+, Rx-, GND
|
|
RS-485-2w
|
Data+, Data-, GND
|
|
• Digital I/O Pins
|
|
GPIO
|
4 programmable I/O pins
|
|
• Software
|
|
Network Protocols
|
ICMP, ARP, IP, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP
|
|
Configuration Options
|
Web Console, Serial Console, Telnet Console, Windows Utility
|
|
Windows Real COM Drivers
|
Windows 95/98/ME/NT/ 2000, Windows XP/2003/Vista/2008/7 x86/64, Embedded CE 5.0/6.0, XP Embedded
|
|
Fixed TTY Drivers
|
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
|
|
Linux Real TTY Drivers
|
Linux kernel 2.4.x, 2.6.x
|
|
Operation Modes
|
Real COM, TCP Server, TCP Client, UDP
|
|
• Environmental Limits
|
|
Operating Temperature
|
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
|
|
Storage Temperature
|
-40 to 75°C (-40 to 167°F)
|
|
Ambient Relative Humidity
|
5 to 95% (non-condensing)
|
|
• Power Requirements
|
|
Input Voltage
|
5 VDC (±5%)
|
|
Power Consumption
|
290 mA @ 5 VDC max.
|
|
• Standards and Certifications
|
|
EMC
|
CE, FCC
|
|
EMI
|
EN 55022 Class B, FCC Part 15 Subpart B Class A
|
|
EMS
|
EN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-11
|
|
Green Product
|
RoHS, CRoHS, WEEE
|
|
• Reliability
|
|
Automatic Reboot Trigger
|
Built-in WDT (watchdog timer)
|
|
MTBF (mean time between failures)
|
NE-4100T: 288,173 hrs
NE-4110A: 289,573 hrs
NE-4110S: 290,276 hrs
NE-4120A: 289,573 hrs
NE-4120S: 285,874 hrs
|
|
• Warranty
|
|
Warranty Period
|
5 years
|
SNMP and E-mail Alerts for Event Trap and Notification
NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions:
- Cold/warm start
- Password authentication failure
- Change in DSR/DCD line signal
- Change in IP address
- Change in password
Dimensions and Pin Assignment
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 10/100 Mbps Ethernet interface
- Up to 230.4 Kbps baudrate support
- Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
- DHCP, BootP, Static IP, and ARP supported
- SNMP and e-mail alerts for event trapping and notifi cation
- Half the size of a credit card—only 57 × 40 mm
- Low power consumption at 1.5W, with single +5V input
|
|
|
|
|
|
|