• Camera
Sensor
1/3” HD progressive scan CMOS
Lens
• 3.6 mm, F1.6: Diagonal 99°, Horizontal 70°, Vertical 39°
• 4.2 mm, F1.6: Diagonal 82°, Horizontal 62°, Vertical 34° • 6.0 mm, F1.8: Diagonal 62°, Horizontal 43°, Vertical 24° • 8.0 mm, F1.6: Diagonal 42°, Horizontal 33°, Vertical 17°
Illumination (low light sensitvity)
• Color: 0.2 Lux @ F1.6
• Black/White: 0.05 Lux
Camera Angle
Pan +/-5°, Tilt +10/-5° (controlled manually)
ICR Control (for day & night)
Auto
Synchronization
Internal
White Balance
ATW/AWB/Custom settings, with 4 preset color temperatures
Electronic Shutter
Auto, Fixed (1/30 to 1/25000 sec)
DNR
Built-in
WDR
On/Off, up to 100 dB
AGC (auto gain control)
2X, 4X, 8X, 16X
Flickerless Control
Automatic, 50 Hz, 60 Hz
Auto Exposure
Level ±5
Image Rotation
Flip, Mirror, 90°, 180°, 270° rotation
Image Setting
Manual tuning with saturation, sharpness, and contrast
Black Level Control
High/Medium/Low
• Video
Video Compression
H.264 (ISO/IEC 14496-10) or MJPEG
Video Output
via Ethernet
Video Streams
4
Video Resolution and FPS (frames per second)
Video Viewing
• CBR Pro™ for good image quality in limited bandwidth transmissions
• DynaStream™ support for automatic frame rate adjustment • 3 configurable privacy mask areas • Adjustable image size and quality • Timestamp and text overlay • OSD (On Screen Display) position adjustable • Maximum of 5 simultaneous unicast connections • Digital PTZ
• Network
Protocols
TCP/IP, UDP, HTTP, SMTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, QoS, IGMPv3, SNMPv1/v2c/v3, DDNS, TFTP, ARP, DHCP, OPT66/67, IPv6, IEC 61375-2-3
Ethernet
1 10/100BaseT(X) isolated Ethernet port, 4-pin M12 Dcode female connector, with 20 cm cable
• Local Storage
SD Socket
Micro SD socket
Interface
SDXC (can support up to 1 TB)
• GPIO
Digital Outputs
1, 5-pin M12 male connector with 20 cm cable, 24 VDC / 1 A
• Power Requirements
Camera
Power over Ethernet (IEEE 802.3af)
Heater Input
24 VDC (for defrosting)
• Physical Characteristics
Housing
Metal housing with IP67 rain and dust protection
Dimensions
83 x 168 x 223 mm (3.27 x 6.61 x 8.78 in)
Weight
1.63 kg (3.59 lb)
• Alarms
Intelligent Video
Camera tamper
Video Motion Detection
3 independently configurable areas
Shock
G sensor for shock detection
Humidity
Detects camera's internal humidity
Scheduling
Daily repeat timing schedule
Imaging
JPEG snapshots for pre/trigger/post alarm images
Custom Alarms
HTTP event servers for setting customized alarm actions
Email/FTP Messaging
Automatic transfer of stored images via email or FTP as event-triggered actions
Pre-alarm Buffer
50 MB video buffer for JPEG snapshot images
• Security
Password
User level password protection
Filtering
By IP address
Encryption
HTTPS, SSH
• Environmental Limits
Operating Temperature
Standard models: -25 to 55°C (-13 to 131°F)
Wide Temp. models: -40 to 70°C (-40 to 158°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
2000 m
Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety
UL 60950-1
Rail Traffic
EN 50155*, EN 50121-3-2:2015
*This product is suitable for rolling stock railway applications, as defined by the EN 50155 standard. For a more detailed statement, click here www.moxa.com/doc/specs/EN_50155_Compliance.pdf
EMI
FCC Part 15, CISPR (EN 55032) Class A
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8
Shock
IEC 61373
Freefall
IEC 60068-2-32
Vibration
IEC 61373
Salt Spray Test
ASTM B368 (CASS) 125 hours
Note: Please check Moxa’s website for the most up-to-date certification status.
• Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
• Minimum Viewing System Requirements
CPU
Pentium 4, 2.4 GHz
Memory
512 MB of memory
OS
Windows XP with SP3 or above, Windows 7
Browser
Internet Explorer 8.x or above
Multimedia
DirectX 9.0c or above
• Software Development
VPort SDK PLUS
Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from Moxa’s website).
Standard
ONVIF Profile S