 |
 |
 |
|
Digi XBee-PRO 900HP embedded modules provide best-in-class range wireless connectivity to devices. They take advantage of the DigiMesh® networking protocol, featuring dense network operation and support for sleeping routers, and are also available in a proprietary point-to-multipoint configuration. Supporting RF line-of-sight ranges up to 28 miles* (with high-gain antennas), and data rates of up to 200 Kbps, these modules are ideal for extended-range applications requiring increased data throughput.
The Digi XBee-PRO 900HP requires no programming and can be configured easily using Digi’s free
XCTU software or via a simplified AT command set. Digi XBee modules are pre-certified for use in multiple countries, further reducing development costs and time to market.
Digi XBee® modules are easy to use, share a common hardware footprint and are available in a variety of different protocols, enabling users to substitute one Digi XBee for another with minimal development time and risk.
|
Hardware
|
Digi XBee-PRO 900HP
|
Digi Programmable XBee-PRO 900HP
|
|
Hardware
|
|
Processor
|
ADF7023 transceiver, Cortex-M3 EFM32G230 @ 28 MHz
Programmable includes: Freescale MC9S08QE32
|
|
Frequency Band
|
902 to 928 MHz, software selectable channel mask for interference immunity
|
|
Antenna Options
|
Wire, U.FL and RPSMA
|
|
Performance
|
|
RF Data Rate
|
10 Kbps or 200 Kbps
|
|
Indoor/Urban Range*
|
10 Kbps: up to 2000 ft (610 m); 200 Kbps: up to 1000 ft (305 m)
|
|
Outdoor/ Line-Of-Sight Range*
|
10 Kbps: up to 9 miles (14 km); 200 Kbps: up to 4 miles (6.5 km) ( w/ 2.1 dB dipole antennas)
|
|
Transmit Power
|
Up to 24 dBm (250 mW) software selectable
|
|
Receiver Sensitivity
|
-101 dBm @ 200 Kbps, -110 dBm @ 10 Kbps
|
|
Features
|
|
Data Interface
|
UART (3V), SPI
|
|
GPIO
|
Up to 15 Digital I/O, 4 10-bit ADC inputs, 2 PWM outputs
|
|
Networking Topologies
|
DigiMesh, Repeater, Point-to-Point, Point-to-Multipoint, Peer-to-Peer
|
|
Spread Spectrum
|
FHSS (Software Selectable Channels)
|
|
Programmability
|
|
Memory
|
N/A
|
32 KB Flash / 2 KB RAM
|
|
CPU/Clock Speed
|
N/A
|
HCS08 / Up to 50.33 MHz
|
|
Power
|
|
Supply Voltage
|
2.1 to 3.6 VDC
|
2.4 to 3.6 VDC
|
|
Transmit Current
|
215 mA
|
229 mA
|
|
Receive Current
|
29 mA
|
44 mA
|
|
Sleep Current
|
2.5 uA
|
3 uA
|
|
Regulatory Approvals
|
|
FCC (USA)
|
MCQ-XB900HP
|
|
IC (Canada)
|
1846A-XB900HP
|
|
C-Tick (Australia)
|
Yes
|
|
Anatel (Brazil)
|
Yes
|
|
IDA (Singapore)
|
Yes
|
|
IFETEL (Mexico)
|
Yes
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Superior LOS range of up to 28 miles* with high-gain antenna
- Simplified AT command set and advanced XBee API
- Over-the-air firmware updates
- Software-selectable channel mask for interference immunity
- Advanced sleep modes: sleeping routers, pin sleep, cyclic sleep
- Try these modules out with a XBee-PRO 900HP DigiMesh Kit
|
|
|
|
|
|
|