 |
 |
 |
|
The Digi XBee® 3 USB Adapter is an easy-to-use USB-to-Digi XBee Wireless Personal Area Network (WPAN) adapter, providing local connectivity to wireless networks. Simply plug the Digi XBee 3 USB Adapter into the USB port of a laptop or PC for instant access to a Digi XBee network and its devices. This compact, USB-powered wireless adapter enables local network configuration, diagnostics and device monitoring.
The Digi XBee 3 USB Adapter is part of Digi’s XBee family of solutions, providing wireless communication between devices, including routers and gateways. The Digi XBee 3 USB Adapter uses Digi’s XBee 3 module which lets you program the desired protocol using the Digi XCTU software platform. The adapter connects with DigiMesh, 802.15.4 and Zigbee network protocols.
|
SPECIFICATIONS
|
DIGI XBEE 3 USB ADAPTER
|
|
PERFORMANCE
|
|
OUTDOOR/RF LINE-OF-SIGHT RANGE*
|
Up to 1968 ft (600 m)
|
|
TRANSMIT POWER OUTPUT (NOMINAL 25º C)
|
6.3 mW (8 dBm)
|
|
RF DATA RATE
|
250 Kbps
|
|
SERIAL INTERFACE DATA RATE (SOFTWARE SELECTABLE)
|
1200 bps - 921.6 Kbps
|
|
DIGI XBEE 3 RECEIVER SENSITIVITY
|
-103 dBm
|
|
POWER REQUIREMENTS
|
|
SUPPLY VOLTAGE
|
5V from PC USB port
|
|
TRANSMIT CURRENT
|
45 mA
|
|
RECEIVE CURRENT
|
26 mA
|
|
POWER-DOWN CURRENT
|
The Digi XBee 3 USB Adapter should not be put into sleep mode
|
|
GENERAL
|
|
FREQUENCY BAND
|
2.4 GHz ISM
|
|
LOCAL MANAGEMENT
|
WebUI (HTTP/HTTPS); CLI (Telnet, SSH, SMS)
|
|
DIMENSIONS (L x W x H)
|
2.29 in x 0.80 in x 0.44 in (5.83 cm x 2.03 cm x 1.12 cm)
|
|
OPERATING TEMPERATURE
|
-40º C to +85º C
|
|
CONNECTOR
|
USB Type A
|
|
ANTENNA OPTIONS
|
Internal only
|
|
NETWORKING & SECURITY
|
|
SUPPORTED NETWORK TOPOLOGIES
|
Zigbee Mesh, Point-to-Point, Point-to-Multipoint, Peer-to-Peer
|
|
NUMBER OF CHANNELS (SOFTWARE SELECTABLE)
|
16
|
|
ADDRESSING OPTIONS
|
PAN, Channel, Address
|
|
REGULATORY APPROVALS
|
|
FCC PART 15.247 (USA)
|
Approved, contains: MCQ-XBEE3
|
|
IC (CANADA)
|
Approved, contains IC: 1846A-XBEE3
|
|
EUROPEAN COMPLIANCE
|
CE Marked
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Programmable to communicate with any of Digi's supported wireless protocols
- Provides connectivity to local Digi XBee networks from a laptop/PC
- Enables fast local commissioning of devices on the local network
- USB powered
- LEDs for UART traffic and network association
|
|
|
|
|
|
|